Psi AUDIO A17-M

Player je jedan od regionalnih lidera u prodaji muzičke opreme i instrumenata.

U ponudi ima širok asortiman najeminentnijih svetskih proizvođača studijske, Pro,
DJ opreme, i rasvete.

Svakom kupovinom, dobija se fiskalni račun i garancija u trajanju od dve godine,
sa obezbeđenim zvaničnim servisom.

Moguće je plaćanje na 12 rata Banca Intesa kreditnim karticama - ukoliko robu kupite preko našeg web shopa ili u našim prodavnicama.

Za svaku kupovinu u vrednosti preko 2000 RSD poštarina je besplatna
na teritoriji Srbije!

Kako biste pogledali kompletan asortiman proizvoda, posetite naš web shop.

The amplifier output also features Adaptive Output Impedance (AOI) output stages, while the active crossover with integrated Compensated Phase Response (CPR) delivers an impulse behavior with accurate stereo imaging. The crossover is optimized for maximum phase coherence, projecting a wide horizontal and vertical listening area.

The rear panel offers a balanced XLR input and features audio-level control and roll-off control for optimizing low frequencies, for standalone use or when using an optional subwoofer. The PSI Audio A17-M ships with a power cord, anti-slippage stickers, and an individual frequency-response diagram.

Broad bandwidth in a compact cabinet
Flat frequency response
Optimized directivity by phase coherency
Optional metal bracket
Protection circuits with overload indicator
True balanced input
Designed for stereo and multichannel monitoring
Magnetically shielded for use near video monitors
Adaptive Output Impedance (AOI) Technology: The AOI is made up of a system that detects the movement of the membrane and the coil, as well as a filtered counter reaction. This is then tuned to achieve the ideal dampening rate for each frequency
Acoustic Load Guide (ALG) Technology: The ALG is used in all regular 2-way and 3-way PSI Audio speakers. The shape and dimensions of the waveguide used in PSI Audio's custom tweeter is specially designed to optimize directivity, as well as maximize sound-pressure level, and extend bandwidth
Compensated Phase Response (CPR) Technology: The CPR system is made up of several all-pass filters, each acting in a specific range. Combined, they create a compensated phase response, which provides a constant group delay that is kept to the bare minimum through the entirely analog technology
Phantom Standby Control (PSC) Technology: The PSC technology enables remote activation and deactivation of the standby mode of your loudspeakers via the signal cable
PSI AUDIO A17-M Specs
Power Power (RMS): 80 W + 40 W
Program Power: 120 W
Input Impedance Sym, 10 kOhms
Sensitivity Sensitivity for 100 dB @ 1 m: 0.775 V
Signal to Noise Ratio (SNR) 96 dBA
SPL Continuous Max SPL @ 1 m: 104 dB (single)
Program Max SPL @ 1 m: 115 dB (pair)
Input Overload 24 V-p-p
Frequency Response Response at -6 dB: 44 Hz to 23 kHz
Tolerances: ±2.5 dB (50 Hz to 20 kHz)
Distortion (THD) Less than 1.5% (100 to 12 kHz)
Phase Deviation Phase Tolerances: ±45° (180 Hz to 20 kHz)
Dispersion Dispersion (P. N. 4 to 16 kHz) at -6 dB: 90° x 90° (H x V)
System 2-way
Crossover Frequency 3.0 kHz
Woofer Woofer's external diameter: 6.9" / 175.0 mm
Diaphragm: 5.1" / 130.0 mm
Tweeter Tweeter's External Diameter: 3.9" / 100.0 mm
Diaphragm: 1.0" / 25.0 mm
Connector XLR-F: 3-pin
Wiring Scheme Signal Input: 1=GND, 2=(+), 3=(-)
Material of Construction MDF
Voltage 115 / 230 VAC ±10% (50 / 60 Hz)
Power Consumption Standby: 1.4 W
Quiescent: 6 W
Max: 100 W
Temperature &Humidity External Temperature: 41 to 104° F / 5 to 40° C
Mean Humidity: Less than 75%
Max Humidity: Less than 90%
Dimensions 7.9 x 12.6 x 9.1" / 200.0 x 320.0 x 230.0 mm
Weight 18.5 lb / 8.4 kg
Packaging Info
Package Weight 19.55 lb
Box Dimensions (LxWxH) 17.1 x 12.9 x 11.4"