DJI Zenmuse L1 gimbal and camera + Enterprise Shield Basic

✅ Poručujemo robu iz Europske Unije. Sve stiže potpuno novo i fabrički zapakovano.

✅ Vreme dostave poručenih artikala je od 3 do 8 radnih dana.

✅ Isporuka robe se vrši preko proverene kurirske sluzbe maksimalno obezbedjeno i dobro upakovano.

✅ Slike proizvoda su informativnog karaktera, proizvod se može razlikovati od proizvoda na  slikama ali se trudimo da uvek odgovaraju proizvodu.

 
 ❗ Obezbedjena GARANCIJA na svaki proizvod.

 ❗ Pre kupovine molimo vas da proverite cenu i da li je proizvod dostupan.

 ❗ Cene I dostupnost proizvoda nisu konstantne, često dolazi do promena kod dobavljaca.

*️⃣ Posaljite ID Proizvoda KP ili jednostavno Link i odgovoricemo u sto kracem roku.

*️⃣ Nabavljamo sve komponente i periferije za računare kao i drugu tehniku.

*️⃣ Ako imate bilo koja pitanja ili želite da proverite cenu i dostupnost proizvoda slobodno nas kontaktirajte.

☎ 063-806-3057  Slobodno pozovite na Viber, pisite SMS ili Viber.

Specification : DJI Zenmuse L1 gimbal and camera + Enterprise Shield Basic (Auto-Activation)

The Zenmuse L1 integrates the Livox Lidar module, high-precision IMU and camera with a 1-inch CMOS sensor and a 3-axis stabilized gimbal. Used together with the Matrice 300 RTK and DJI Terra, the L1 forms a complete solution that provides real-time 3D data, efficiently capturing details of complex structures and producing highly accurate reconstructed models.

Extraordinary efficiency
Create true-color point cloud models. It can process up to 2 km2 area in a single flight with the help of the Livox Lidar module and the 70 ° viewing angle, 1 inch RGB camera.

High accuracy
You can create centimeter-level reconstructions thanks to the high-precision IMU, visual camera-based sensors and GNSS data.

Ready immediately
The IP44 rating allows the L1 to be used in rainy or foggy environments. The Lidar module's active scanning mode also enables night flying.

Livox Lidar Module
- Frame Lidar, with up to 100% actual point cloud results
- Sensing range: 450 m (80% reflectivity, 0 klx) / 190 m (10% reflectivity, 100 klx)
- Actual point rate: 240,000 points/s
- 3 distance measurements at the same time
- Linear and non-repetitive scanning mode
- Point cloud live view

Measurements and comments
Obtain and communicate critical dimensions in the point cloud model using measurements and annotations.

One-stop processing
DJI Terra combines IMU and GNSS data to calculate point clouds and visible light, as well as POS data calculations, so you can easily generate reconstructed models and accuracy reports.