Ispravan i testiran…. Spaun 9x6 Multiswitch SMS 9962 NF Premium Class; Active Multiswitch for application of 2 Satellites 6 Ports. Features:
SAT-IF:
- SAT-IF amplifiers precompensating 4 dB slope
IF selection logic:
1. Using the analogue control signals 14/18 V, 0/22 kHz and ToneBurst or the DiSEqC commands Polarity, Band and Position
2. Using the mode selector available for each receiver to swap
The multiswitches support a standby mode. The SAT-IF amplifiers and the LNB remote voltage are only active when at least one receiver feeds a remote voltage to its multiswitch outlet
The multiswitches support DiSEqC 2.0. Bidirectional communication between receiver and multiswitch is possible
9 isolated termination resistors are shipped with the multiswitches to terminate the trunklines
Spec:
Inputs / Outputs: 9 / 9 +8
SAT / Terr. : 8/1
Outputs / Subscribers: 8
Tap loss
Terr. : passive 5 . . . 862 MHz :18 . . . 21,5 dB
Tap gain
Terr. : active 47 . . . 862 MHz: 3,5 . . . 0,5 dB
SAT: 950 . . . 2200 MHz: -2,5 . . . 6,5 dB
Loss Trunklines
Terr. : passive 5 . . . 862 MHz: 5,5 dB
Gain Trunklines
Terr. : active 47. . . 862 MHz: 18 dB
SAT-IF: 950 . . . 2200 MHz: 13 . . . 17 dB
Noise figure Terr. : < 7 dB
Noise figure SAT: < 7 dB
Max. output level
47 . . . 862 MHz 60 dB IMA3 / EN 50083-3: 105 dBμV
950 . . . 2200 MHz 35 dB IMA3 / EN 50083-3: 109 dBμV
Rejection
Terr. passive / SAT: > 30 dB
Terr. active / SAT: > 26 dB
Terr. / SAT: > 32 dB
Isolation
Trunk / Trunk: > 30 dB
Receiver / Receiver: > 28 dB
Mains power supply U~: 100 . . . 240 V / 50 . . . 60 Hz
Power consumption
max. Terr. 18 V / 250 mA: 36 W
max. Terr. 0 V: 34 W
Standby / Terr. 18 V / 250 mA: 6W
Standby / Terr. 0 V: 3W
LNB remote current: 800 mA
Single port current: 400 mA
Current consumption from Receiver: 25 mA
Ambient temparature: -20 . . . +50 °C Description
+ Expandable through Zukauf from Cascade – Switches to 12/20 or more ports. + class A shielding and enhanced CE approval + Energy – saving mode due to switching power supply + standby – Circuit – your advantage: when no receiver is switched on, it will auto turn off the multiswitch also made from and uses no power. + terrest Rik: Suitable for return path + Spaun/own amplifier/Filter concept for Sat – Receiving + various filter systems for noise-free sat – Programs + separate level plate for any sat – Input Characteristics + Built-in equaliser in all sat – ZF layer + area of application: Distribution of 2 satellites on six separate places in analogue and digital. Possibility to expand on more than 6 fittings and inputs: 8 satellite – Inputs (2 satellites with 2 Quad LNB's) and 1 terrestrial. Input + outputs are: 6 and 9 Cascade outputs for connecting an extension switch + Frequency Range: Terrestrial. : 5 – 862 MHz/SAT: 950 – 2200 MHz) + Reinforcement: Sat: 12 – 16 dB (Master)/terrestrial. : 15 db (stem) + Isolation: > 26dB (sat) + output level: 109 audio dBmV LNB supply: 800 mA + Power consumption: 36 up to 40 W; Standby – Modes: 3 up to 6 W + Technical requirements: faultless function only to be used in association with Quattro – LNB's operates only indoor and in dry rooms/230 V – Connection + accessories included: 9 x Diodenentkoppelte Endwiderstände For Completion Of The Cascade outputs
Features & details
- One of the few can easily add (9/6 – multiswitch, the when you later needs on several ports.
- 5-year manufacturer's – Warranty
- Made in Germany (100%, auch interior (. )
- Energy – saving technology + standby – circuitry
- Future proof: HDTV/DVB S2 ready POGLEDAJTE I OSTALE MOJE OGLASE